Sea To Summit 15mm 2 Pin Side Release

Sea To Summit 15mm 2 Pin Side Release

See our entire range from Sea To Summit here!

The Sea To Summit 15mm 2 Pin Side Release is a repair buckle to replace a broken or worn out quick release buckle on, for example, a drybag or a backpack carrier belt. The two removable pins allow both parts of the buckle to be mounted in existing, sewn-on strap loops without the need to split the straps open and re-sew.

The buckle is designed for 15 millimeter wide straps and weighs only 5.5 grams. The assembly requires a standard Phillips screwdriver and can be done both at home and on a trip.

Two pins for fixed strap loops

The designation 2 Pin means that both the male and female parts of the buckle have a removable stainless steel pin. The design is suitable when the original buckle is in a sewn-in strap loop on both sides.

The pins are unscrewed, the buckle parts are placed in the respective strap eyelets and the screws are then refitted. This provides a durable repair without the need to change the old stitching.

For non-adjustable buckles

This 2-Pin model is intended as a replacement for non-adjustable buckles. It is particularly suitable for roll closures on dry bags and some fixed buckles on backpack hip belts.

The buckle does not have a step lock and therefore cannot be used to adjust the length of the strap. If one side consists of a loose strap that needs to be tightened or released, Sea to Summit's 1-Pin Side Release model in the corresponding width is normally required.

Choose size according to strap width

The size specification 15 mm refers to the width of the strap or strap eyelet – not the total outer dimensions of the buckle. Measure your existing strap flat before ordering.

The buckle is not universal. Also check that the existing structure has a fixed strap loop on both sides and that the buckle dimensions work with the equipment.

Benefits

Repair buckle for 15 mm wide straps

Two removable pins

Fits fixed strap loops on both sides

Assembled without sewing

Requires only a Phillips screwdriver

Can be mounted outdoors on a tour

Corrosion-resistant stainless steel pins

Durable POM buckle

Weighs only 5.5 grams

Fits many drybags and some backpack straps

Provides a durable replacement for a broken quick release buckle

Practical spare buckle in the repair kit

Specifications

Product type: Side opening repair buckle

Strap width: 15 mm

Number of pins: 2

Adjustable: No

Buckle material: 100% POM

Material, pin: 100% stainless steel

Dimensions: Approximately 2.3 × 0.8 × 3.8 cm

Weight: Approximately 5.5g

Color: Black

Tools for assembly: Phillips screwdriver

Common uses: Drybags and some fixed buckles on backpack hip belts

Quantity in the package: 1 complete buckle

Mounting

Remove the broken buckle without damaging the strap loops or stitching. Unscrew the stainless steel pins from both parts of the new buckle with a Phillips screwdriver.

Place each buckle part into the existing strap eyelet, replace the pins and tighten the screws securely. Do not overtighten the screws. Then check that the buckle opens and closes correctly and that both pins are securely in place.

Also check the straps and stitching. A new buckle will not fix a damaged strap or a stitching that is coming loose.

Important information

The buckle is intended for repair of compatible outdoor equipment and is not certified for climbing, personal belaying, or other uses where a failure could cause a fall or serious personal injury.

Rinse the buckle in clean water if it has been exposed to sand, dirt or salt water. Let it dry and check regularly that the pins are tight and that the plastic is not cracked.