Search
No search results found
No search results found
Nordisk Svalbard 1 SI (2.0) Spare Pole Set Alu
Nordisk Svalbard 1 SI (2.0) Spare Pole Set Alu is a complete spare pole set adapted for the Nordisk Svalbard 1 SI (2.0). The set contains two lightweight and durable 9 mm tent poles in DAC Featherlite NSL aluminum.
A practical original accessory when an existing pole has been bent, damaged or lost – or as extra safety during longer hikes and expeditions.
See our entire range from Nordisk here!
The Nordisk Svalbard 1 SI (2.0) Spare Pole Set Alu is a model-specific spare pole set that helps you extend the life of your tent. If a pole becomes damaged, bent or missing, you don't have to replace the entire tent. Instead, replace the pole system with a new set that is designed for the tent's construction.
The set includes two 9 mm diameter tent poles , made of lightweight and durable DAC Featherlite NSL aluminum . The poles are adapted for the Nordisk Svalbard 1 SI (2.0) and provide the correct shape, fit and stability when pitching the tent.
A complete spare pole set is especially valuable during longer mountain hikes, bike tours and expeditions where a damaged pole can otherwise make the tent difficult or impossible to use. It can also be kept at home as a spare to quickly replace a damaged original set for the next trip.
Nordisk's spare poles have removable end plugs. This allows the poles to be shortened or adapted for other purposes, such as simpler tarp solutions, when not used with the tent.
Original spare rod set from Nordisk
Adapted for Svalbard 1 SI (2.0)
Complete set with two tent poles
Made of lightweight DAC aluminum
9 mm rod diameter
Replaces bent, damaged or lost rods
Provides the right fit for the tent's construction
Removable end plugs
Can be taken as extra security on longer trips
Helps extend the life of the tent
Product: Nordic Svalbard 1 SI (2.0) Spare Pole Set Alu
Product type: Spare tent pole set
Compatibility: Nordic Svalbard 1 SI (2.0)
Number of bars: 2 pcs
Rod diameter: 9 mm
Material: Aluminum
Aluminum type: DAC Featherlite NSL
Surface treatment: Green anodizing
End plugs: Removable
Weight: Approximately 160g
Article number: 10931202
The spare rod set is specially adapted for:
Nordic Svalbard 1 SI (2.0)
Always check the full model name of the tent before ordering. Svalbard 1 is available in several versions and model years, and compatibility with other versions cannot be guaranteed.
The set is intended for the SI version and should not be confused with the spare rods for the Svalbard 1 PU.
A tent pole should be replaced if it:
Has received a permanent bend
Has cracked or broken
Has damaged joints or segments
No longer fits properly in the tent pole mounts
Has a damaged elastic cord
Has been lost
Always check the poles after trips in strong winds or after the tent has been subjected to heavy loads.
Remove the old pole set and install the replacement poles in the same way as the tent's original poles.
Insert the poles into the tent pole pockets and attach them to the pole holders according to the tent's standard setup instructions. Make sure all segments are fully joined before applying any weight or bending to the poles.
Avoid pulling the poles through the pole channels. Instead, gently push them forward to reduce the risk of the segments separating and damaging the tent fabric.
Repair of Nordic Svalbard 1 SI (2.0)
Replacement of bent or damaged tent poles
Spare equipment during longer hikes
Mountain tours and trekking
Bikepacking and bike tours
Camping and outdoor activities
Expedition and safety equipment
Those who want to extend the life of their tent
Wipe the bars after use and remove sand, soil, salt and other dirt from the joints.
Allow the poles to dry completely before storing. Salt water and prolonged moisture can affect both the aluminum and the elastic line.
Check regularly:
Rod segments and joints
End plugs
Elastic rope
Any cracks or bends
Store the bars in their bag and avoid placing heavy equipment on top of them during transport.
The product consists of the spare pole set only. Tent, outer tent, inner tent, ground stakes and other accessories are not included.
Make sure all rod segments are properly joined before assembly. If a segment is not fully assembled, the joint may be damaged when the rod is bent.
The set is adapted for Nordisk Svalbard 1 SI (2.0).
No, the Svalbard 1 PU uses a different spare pole set. Please check that your tent is the SI version before ordering.
The set contains two complete tent poles.
The poles are made of lightweight and durable DAC Featherlite NSL aluminum.
The rods have a diameter of 9 mm.
The weight is stated at approximately 160 grams.
The removable end plugs allow the poles to be shortened or adapted for certain tarp solutions, for example. For tent use, it is recommended that they be used in their original configuration.
No, the product consists of the spare pole set only. Tent and other equipment are sold separately.
On longer or remote trips, a spare pole set can make it possible to continue using the tent if the original poles are damaged or lost.
